C&H Precision: V3 Adapter Plate Trijicon/Holosun for GLOCK® MOS

C&H Precision Weapons : CHPWS RMR/Holosun V3 Adapter Plate
(You save $15.00)
All CHPWS V3 plates are 100% Made In America, using only American Made Material, by Americans.  Each V3 plate is fabricated from 6061 precipitation-hardened aluminum alloy and then finished withType III Black hardcoat anodize per MIL-Spec-A-8625 

-Fills those ugly sight gaps in front and behind your Red Dot
-Four locating pins / lugs
-Thinner design, Lighter Design, more than Twice the Thread Engagement to secure your red dot to the plate.
-The screw sizes are machined into the plate in case you need more, you’ll know the size and length!
-The C&H Adapter Plate allows you to mount your Trijicon RMR or your Holosun 507 Reflex Sight to your GLOCK® MOS slide perfectly
-Comes with M3 screws to secure the plate to your pistol as well as 4-40 screws to secure your RMR or Holosun to the plate.
-There will be no more gap, everything looks nice and neat on your GLOCK® MOS. Comes with two screws.
-This adapter plate does not include the Trijicon RMR or the Holosun Reflex sight.


Major differences between the V3 and all other plates:

  • 7 threads engagement with V3 vs 1.5 to 3 with other plates
  • Four locating pins vs two pins
  • Comes with screws to attach an RMR and Holosun to the V3 Plate
  • No RMR Sealing Plate Needed for Type II RMR’s.  If you run a Type I RMR, you may still want to run the sealing plate with the bump to prevent battery flicker.

Mil/LE Sales


DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK®. GLOCK® does not warrant or represent that this product is compatible with GLOCK® pistols


Write a Review
  • 5
    Good upgrade.

    First time buyer from mile high. The good was fast shipping even durning COVID 19 bs. Everything I want from a retailer emails with tracking info, fast shipping, and good packaging that my mailman can’t mess up.

    Now for the plate. It’s a definite upgrade over the stock plate. I tried just test fitting the RMR on my MOS Glock before I got my order. This is tighter and fills the front gap that worried me. As for mounting, clean the slide threads a few times before mounting. I only did a once over with Acetone, and the screws that hold the plate down backed out and gave me some slight play after 500 rounds at the range. Could have also been the heat from the slide that kill the purple loctight as it got hot from running it quickly. Definitely keep an eye on it. Overall 5 stars, would recommend every day.