Seal 1 SKIT R/P: Gun Cleaning Kit All Rifle and Pistol

SKU:
Seal 1:SKIT R/P
$25.64
(No reviews yet) Write a Review
Current Stock:
1
SEAL 1™  CLP Plus® Paste Instructions     
Bore Cleaning:
1.Apply liberally to bore brush run brush up and down bore numerous times.
2.Apply liberally to cotton bore patch or use pre-saturated SEALSkinz™
3.Using a tight fitting jag patch combination run patch up and down bore two or three times.
4.Repeat until patch comes clean.
5.Run dry patch up and down bore to remove any excess.
6.After two or three applications in most cases you will experience an increase in muzzle velocity.
All Other Cleaning:
1.Apply liberally and scrub until clean. 
2.Wipe clean with cloth or bore cleaning patch.
Storage and Protection:
1.For fastest result it is best to treat you gun while it is warm.
2.Apply SEAL 1 CLP PLUS® to all surfaces and let soak in.
3.Wipe with clean cloth to remove any excess
4.After two or three applications you should only need to wipe down
with a SEALSkinz™ Cloth or repeat this process occasionally.
 
 
SEAL 1™  CLP Plus® Liquid Instructions         
Bore Cleaning: 1.SHAKE WELL
2.Apply liberally to bore brush run brush up and down bore numerous times.
3.Apply liberally to cotton bore patch or use pre-saturated SEALSkinz™.
4.Using a tight fitting jag patch combination run patch up and down bore two or three times.
5.Repeat until patch comes clean.
6.Run dry patch up and down bore to remove any excess.
All Other Cleaning:
1.Apply liberally and scrub until clean. 
2.Wipe clean with cloth or bore cleaning patch.
Storage and Protection:
1.For fastest result it is best to treat your gun while it is warm.
2.Apply SEAL 1 CLP PLUS® to all surfaces and let soak in.
3.Wipe with clean cloth to remove any excess 
4.After two or three applications you should only need to wipe down with a SEALSkinz™ Cloth or repeat this process occasionally.
 
 
SEAL 1™ SEAL Skinz™   E-Z Cloth Instructions        
1.Use SEAL Skinz™ EZ Cloth™ to wipe down and protect all surfaces. 
2.Wipe with cloth to remove any excess.
 
Storage and Protection:
1.For first time use and for the best protection from rust and corrosion it is best to use SEAL 1™ CLP PLUS® Liquid or Paste 
or cleaning and treatment.
2.For fastest results it is best to treat your gun while it is warm.
3.Apply SEAL 1™ CLP PLUS® to all surfaces and let soak in.
4.Wipe with clean cloth to remove any excess
5.After two or three applications you should only need to wipe down with a SEALSkinz™ EZ Cloth™ or repeat this process occasionally.