The Sparrow 22 is the first silencer in the world to offer the patented multi-part containment (MPC) technology, which allows the Sparrow 22 to be easily disassembled for cleaning and maintenance after heavy use.
Because the .22 LR round is not copper jacketed, molten lead and carbon debris will explode into the silencer when the projectile exits the muzzle. After some time, it is possible for a .22 suppressor to fill completely with lead and become heavy and ineffective. To avoid this issue, .22 silencers must be disassembled for cleaning and regular maintenance.
Until SilencerCo introduced the Sparrow 22, the only .22 silencers that could be disassembled for cleaning required a cleaning every 50 to 200 rounds. However, often the components of those silencers would be fused together and unable to come apart. Competitor products on the market have baffles in their .22 silencers that must be removed by twisting the outer tube around the baffles and/or sliding the outer tube off of the baffles. When the lead and carbon debris adhere to the inner wall of the outer tube and fill the spaces between the baffles and the outer tube, there is simply too much buildup of fouling and lead to remove the outer tube in that manner.
User Serviceable Multi-Part Containment Technology
Full Auto Rated on .22 LR
O-Ring engagement to keep barrel threads clean and the silencer securely mounted
Serialized outer tube is protected
Stainless Steel is Chemical and Solvent Resistant
Mile High Shooting Accessories (MHSA) will only ship suppressors to Class III FFL holders. BATF regulation information for Suppressor ownership are as follows:
Be at least 21 years of age.
Be a U.S. citizen.
Have no felony convictions or domestic violence convictions.
Have no dishonorable discharge.
Not deemed mentally unstable by a competent authority.
The NFA rules/laws are posted through the BATF website. At this time, the following states ALLOW private ownership of suppressors: AL, AK, AR, AZ, CO, CT, FL, GA, IA, ID, IN, KS, KY, LA, ME, MD, MI, MN, MO, MS, MT, NC, NE, ND, NV, NH, NM, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, VT, WA, WV, WI, and WY. CA allows class 3 dealers and class two manufacturers to possess suppressors.
U.S. Government Export Restriction
This item is restricted for export by the State Department and Department of Commerce. Make sure that you are familiar with all applicable laws. ITAR Information.
FFL Requirements & Magazine Restrictions