Loading... Please wait...

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3

TacomHQ Charlie TARAC: 30 Mil Ready for Schmidt & Bender 5x25-56 (ITAR)


 Other Details

Charlie Tarac 30mil SB56

 Product Description

This product has rules and regulations around export. By adding this item to your cart, you agree that you have read the ITAR link below and understand the regulations around the international exportation of certain products. Please read the ITAR regulations here.


Coming soon! Charlie TARAC Nightforce Adapter for 56mm Objective Nightforce Scopes!



Sniper, special forces, ELR, and competition shooters
Ballistic Range 100yd to +3,000yd
Shift See Conversion Chart
Material 6061 aluminum
Finish Hard anodized
Colors Matte gray, black, or Army green
Weight 12.0 oz (may vary according to add-ons)
Dimensions                         3.7" x 3.5" x 2.0" (may vary according to add-ons)
Mounts LaRue QR tactical mount
Adjustable Up to +120 MILs
Tactical Case 1150 Pelican Case w/ foam














MIL 20 29 30 35 40 44 50 58 60 70 72 80 87 90 100 116 120
MOA 69 100 103 120 138 150 172 200 206 241 250 275 300 309 344 400







Overview of the Charlie TARAC (Target Acquisition)

The Charlie is an optical accessory that adds up to 120+ MILs (or 400 MOA) to scopes without having to change rails, rings, cheek piece, or 100 yard zero via mirrors.  Shoot with full magnification.  MIL or MOA (true not shooter's) is built to order.​


Keep Your 100 Yard Zero

The Charlie Tarac shifts an incoming target image with mirrors (like a periscope) to add a specific MIL or MOA value.  Instead of tilting the scope, requiring slanted rails, elevated scope rings, and changing your cheek position (a real pain in the neck), the Charlie shifts the target image optically (via mirrors) so you change nothing.  With the Charlie, set your rifle, rail, rings, and cheek position, to 100 yards, and add the Charlie only when you need to shoot extreme long range or for night operations.  "A 100 yard zero is a shooter's lifeline." Ken Decker, a former sniper with 3rd Ranger Battalion.


Shoot ELR with full magnification
The Charlie is a standalone device that works as an accessory to your optic to add MIL or MOA, and because the shift occurs within the unit and not the scope, you will be able to shoot ELR with full magnification.  Also, a MIL stays a MIL.  If your unit ever failed or broke, just take the Charlie off and still have the full functionality of your optic.

Built for recoil

The Charlie is used by Todd Hodentt, David Tubb, Walter Wilkinson, Eduardo De Fontcuberta, and other groups on .308, .375, .408, and 50 cals without a failure to date.  (We also provide two extension bolts with the magnetic scope mount version for added assurance.) The Charlie Tarac is extremely repeatable (once set and fastened) and you will never have to worry about misalignment.​


​​​Fully adjustable

​The Charlie is a fully adjustable unit.  Click here to learn how.


Methods of attachment

​The Charlie Tarac attachs via LaRue quick-release or directly to your scope's bell (in place of your sunshade) with magnets and two extension bolts (takes less than 40 seconds).  There are no special wrenches or tools with any of our products.  Everything is designed with the end user in mind.  Therefore, bolts are commonly found at Ace Hardware or comparable store.  Click here to learn how.


Mirrors are highly scratch resistant

The Charlie's mirrors are more scratch resistant than most high-end scopes.  They have a mil spec coating that resists scratch, salt, fog, and chemicals.  Maintain the mirrors the same as you would your scope.


No barrel mirage
The fact we shift the target image optically before your scope "sees" the image, you will not have to tilt your scope down to look over your barrel and risk of obscuring your image quality from barrel mirage (from a hot day or shooting consecutive rounds).  The front viewing port is purposely built high to mitigate this variable.


No turrets

The ultimate goal of the Charlie is to provide an incomparably fast and accurate range adjustment for scopes.  To give you the ability to shoot the reticle (if applicable) and or use your scope's turrets for final adjustment.  As nothing will be faster or more reliable.  In an example offered by Ken Decker formerly with 3rd Ranger Battalion sniper on NRA, if you have a scope with tenth MIL increments, to dial 29 MILs for a mile shot that 290 "clicks."  Either there is going to be mechanical error and you have "ghost clicks" or you will lose count.



TACOMHQ will cover all manufacturing defects for one year.




 Find Similar Products by Category

Vendors Other Products

 Product Reviews

Write review

This product hasn't received any reviews yet. Be the first to review this product!


Connect with us

Facebook Twitter YouTube

Mile High Shooting Accessories
3731 Monarch St
Erie, Co 80516
Toll Free: 1.877.871.9990
Phone: 1.303.255.9999
Fax: 1.303.254.6572

Mon-Fri: 10:00AM – 6:00PM
Sat: 9:00AM – 4:00PM
Sun: Closed

Not responsible for typographical, pricing, product information or advertising errors.

*No other discounts apply. Call for details. Free shipping to Continental US only.

Click the button below to add the TacomHQ Charlie TARAC: 30 Mil Ready for Schmidt & Bender 5x25-56 (ITAR) to your wish list.