Spuhr SP-4602C FDE: 34mm Picatinny Mount 20.6 MOA - 1.5" - FDE

Spuhr
SKU:
SP-4602C FDE
UPC:
7.34015E+12
$557.00
Current Stock:
Adding to cart… The item has been added

The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven sets of interfaces to attach any of more than 40 different accessories and has a bubble level integrated in the rear plane of the mount body to prevent canting of the rifle. The rings are diagonally cut for increased visibility of the elevation and windage turrets (US Patent 8,733,011). 

The mounts are machined from billet 7000 series aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring and clamping screws are zinc-nickel coated for corrosion resistance and come pre-waxed from the factory to ensure proper torque values. The mount is shipped with a manual and a “wedge” leveling key.

Features:
  • Durability: Prevents damage on scope due to flexing during heavy recoil or rough environment. The snipers rifle and the spotters carbine can have the same mount, enabling the use of same equipment and accessories. Rings are grooved inside to get a better grip of the scope and enabling gluing of the scope. The mount is milled out of one billet of material instead of being screwed together from small parts.
  • Scope Rotation: Patent pending solution for indexing the rotation of the scope, using an included tool/gauge to index the scope correctly to the mount and gun. Important since an incorrectly indexed scope unintentionally will also have a sideways adjusted point of impact and since it will be adjusted sideways when it is adjusted for elevation.
  • Mounting Placements: Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don′t want your barrel to touch the forend, you don′t want the sights to be mounted on the forend. Our mounting system has a minimum of seven interfaces for accessories and the laser can easily be mounted on the mount, giving the advantage of an undisturbed laser and a weight more central on the gun instead of forward.
  • Accessible and Readable Dials: The rings are cut 45 degrees instead of the usual horizontal, providing several advantages. The screws holding the parts together are not in the way of the knobs, thus the shooter can quickly determine the settings of the knobs. It also gives the shooter a horizontal line that helps the shooter not to rotate his gun unintentionally. The rings have index marks on the top and right side, making low knobs more easily readable.
  • Accessories: Possibility of using various accessories such as angle cosine indicator, back up sights, lasers, illuminators, Night vision mounts etc. With traditional mounts this can be achieved only if there is sufficient space on the middle tube for additional rings, which there rarely is. Ideal Scope Mount Systems have interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces for certain accessories such as angle cosine indicators and red dot sights. A selection of interfaces for popular accessories are available, and others can be made to specification.
  • Included: 10-degree wedge included 
Specifications:
  • Ring Size: 34mm
  • Tilt: 6MIL/20.6 MOA
  • Height: 38mm (1.50in)
  • Length: 120mm/4.72in (body)/130mm/5.12" (OAL)
  • Weight: 255g/9.0 oz

 

Note: The SP-4602C FDE is designed for use with 56 mm objectives on rifles with MIL-STD-1913 or STANAG 4694 rails and is especially suitable for extended picatinny rails combined with night vision equipment. The SP-4602C will fit most 34 mm scope tubes including scopes with extended erector housings.

 

Size:
34mm
MOA:
20 MOA