Spuhr SP-7601: 40mm Picatinny Mount 20 MOA - 1.18"

Spuhr : SP-7601
Limited Stock, Discontinued
SPUHR SP-7601 - 40mm Picatinny Mount 6MIL/20.6 MOA - 1.181"
Ring Size:  40mm
Tilt:  6 MIL / 20.6 MOA
Height:  30mm(1.181in)
Length:  126mm(4.96in)

Spec Sheet (PDF)



Prevents damage on scope due to flexing during heavy recoil or rough environment. The sniper’s rifle and the spotter’s carbine can have the same mount, enabling the use of same equipment and accessories. Rings are grooved inside to get a better grip of the scope and enabling gluing of the scope. The mount is milled out of one billet of material instead of being screwed together from small parts.

Scope Rotation

Patent pending solution for indexing the rotation of the scope, using an included tool/gauge to index the scope correctly to the mount and gun. Important since an incorrectly indexed scope unintentionally will also have a sideways adjusted point of impact and since it will be adjusted sideways when it is adjusted for elevation.

Mounting Placements

Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don′t want your barrel to touch the forend, you don′t want the sights to be mounted on the forend. Our mounting system has a minimum of seven interfaces for accessories and the laser can easily be mounted on the mount, giving the advantage of an undisturbed laser and a weight more central on the gun instead of forward.

Accessible and Readable Dials

The rings are cut 45 degrees instead of the usual horizontal, providing several advantages. The screws holding the parts together are not in the way of the knobs, thus the shooter can quickly determine the settings of the knobs. It also gives the shooter a horizontal line that helps the shooter not to rotate his gun unintentionally. The rings have index marks on the top and right side, making low knobs more easily readable.


Possibility of using various accessories such as angle cosine indicator, back up sights, lasers, illuminators, Night vision mounts etc. With traditional mounts this can be achieved only if there is sufficient space on the middle tube for additional rings, which there rarely is. Ideal Scope Mount Systems have interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces for certain accessories such as angle cosine indicators and red dot sights. A selection of interfaces for popular accessories are available, and others can be made to specification.


20 MOA


Write a Review
  • 5
    Spuhr Mount - If you can afford this mount, there is none better

    I have mounted close to 100 scopes over my lifetime, this was the easiest by far. If you are interested in shooting long distance you most likely believe in spending big dollars on your optics. Do not overlook your mounting system. With the 10 degree wedge that comes wit this mount, leveling the scope takes about 30 seconds and it is absolutely dead level.

    Be cognizant of your mounting system in that this base is going to add 20 MOA to your system. If you have a 40 MOA or greater base on your rifle you will not be able to shoot exactly on target at 100 yards. With 60 MOA you will impact approximately 4-8" high at 100 yards. So if you would like to be able to adjust with your scope from 100 yards to 2000 yards + , you will need to ensure you do not exceed 50 MOA total in you r system. In other words your base should be 30 MOA or less if hitting at 100 yards is important to you.

    I am very impressed with this mount and I am very pleased to have purchased it from Mile High Shooting as he owner is my brother in Arms. Buy from and American veteran, buy from Mile High Shooting.

    God Bless America.