Thunder Beast: Dominus-CB Suppressor

Thunder Beast
SKU:
DOMINUS-CB
$1,330.00
Current Stock:
The DOMINUS-CB is based on the DOMINUS-SR suppressor, but uses the CB mount. Please refer to the DOMINUS-SR specifications page for more information about the SR. The CB mount derates the retention level from full-auto capable but the resulting suppressor is lighter, shorter, and less expensive vs. the DOMINUS-SR.

Compared to the ULTRA 7, the DOMINUS-CB is 0.75" shorter and larger in diameter by 0.30", but about 2 dB quieter. It meters at 137 dB (milspec left/right) and 126 dB at shooters-ear1 on a 20-inch .308. This puts it right between the Ultra 7 and Ultra 9, These are numbers from the PULSE system which should be considered definitive, supplanting all data from the older 2209 sound-level meters.

The DOMINUS-CB features the "CB" mount system for interoperability with all CB muzzle devices, for users who have other ULTRA series suppressors.

The DOMINUS-CB is shorter but fatter than the ULTRA series, and about the same weight per volume. It is 6.25 inches long and 1.8 inches in diameter. The DOMINUS-CB itself weighs 9.6 ounces. The CB brake weighs 2.6 ounces.

Specifications

Maximum rated caliber .30 caliber, up to .300 RUM
Material Titanium
Length 6.25 inches
Diameter 1.8-inch max OD
Mounts CB series brake or flash hider
Weight 9.6 ounces
Brake threads available 1/2-28*, 5/8-24, 9/16-24, 3/4-24, 3/4-28, M18x1.0, M18x1.5

 

DOMINUS-CB CATEGORY: "SEMI-AUTO/AIMED-FIRE" [SA-AF] 

This category contains our entire ULTRA series as well as the DOMINUS-CB. These suppressors can withstand firing schedules from a semi-automatic centerfire rifle in which a sight picture is obtained for each shot. This typically means a sustained firing rate not to exceed about one shot per 3 seconds for 2-3 magazines.

Suppressors in this category have a defined minimum barrel length which depends principally on the cartridge's pressure curve and secondarily on the thermal input (esp. for SBR barrel lengths).

Even though the ULTRA suppressors are "precision rifle cans", they are a lot more durable than most people think when someone says a "bolt-gun suppressor." The ULTRA 5, 7, 9, and 338 ULTRA also lack a mount with secondary retention, and the possibility exists that one could loosen during full-auto bursts.

APPLICATION NOTES

Minimum barrel lengths: 

 

5.5" .300 Blackout (subsonic and full power)
7.5" 6.8 SPC, 7.62x39
10.3" 223 Rem, 5.56, 6.5 Grendel
12.5" .308 Win, .260 Rem, 6.5 Creedmoor
18" 6.5 SAUM, 6.5 PRC, 7mm RM, 7mm WSM, .300 WIN MAG, .300 WSM
20" 7mm RUM, .300 RUM
22" .300 Norma Magnum, 28 Nosler, 7 STW, 26 Nosler

 

 

Once your suppressor purchase is finalized with Mile High Shooting, a Form 3 will be filed with the ATF requesting approval to transfer your suppressor to your chosen FFL. Initial processing can take 3-7 business days. Customers may help expedite this time frame by requesting the chosen FFL to send a copy of their FFL & SOT to ffl@milehighshooting.com. Please note, initial processing time may be delayed further if your chosen FFL fails to provide required documentation in a timely manner. Once submitted, it takes 7-21 days for Mile High Shooting to receive the Form 3 approval. As soon as the approval is received, your suppressor and any accessories will be shipped to your chosen FFL within 24-48 business hours by 2 Day Air. Your chosen FFL will then contact you once it is received and you may complete your Form 4 processing at their facility. 

___LEGAL INFO______

Mile High Shooting Accessories (MHSA) will only ship suppressors to Class III FFL holders. BATF regulation information for Suppressor ownership are as follows:

Be at least 21 years of age.
Be a U.S. citizen. 
Have no felony convictions or domestic violence convictions. 
Have no dishonorable discharge. 
Not deemed mentally unstable by a competent authority. 

The NFA rules/laws are posted through the BATF website
At this time, the following states DO NOT ALLOW private ownership of suppressors: CA, MA, DE, HI, NJ, NY, RI, IL, District of Columbia. CA allows class 3 dealers and class two manufacturers to possess suppressors.

 

 

 

  U.S. Government Export Restriction

This item is restricted for export by the State Department and Department of Commerce. Make sure that you are familiar with all applicable laws.  ITAR Information.

 

FFL Requirements & Magazine Restrictions

This item has to ship to an FFL. Please read the attached information. Shipping Rules & Magazine Restrictions.

  

 

PaypalRestrict:
PaypalRestrict
FFL:
Yes