Area 419: Hunt Scope Rings, 34mm, 30mm Height

Given the success of Area 419's MATCH and TACTICAL scope mounts, they knew what the HUNT rings needed to be. Light, rigid, and able to hold onto an optic in a dramatic recoiling environment.

To do this was no small manufacturing task. This led Area 419 down a rabbit hole, ultimately arriving at a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made.

Like most rings, these begin as separate parts. They are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, Area 419 takes an extra step. Once these parts return from anodizing, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Rings are then brought off the machine in sets and packaged together so you know that your rings were made for one another, and you can rely on them for decades.

Is it overkill? Probably. But Area 419 thinks it’s the right way. So that’s what they are going to do.

Specifications:

• Material: 7075 Aerospace Grade Billet Aluminum (with Stainless Steel Hardware)
• Coating: Type 3 Hardcoat Anodize (internal bore is raw aluminum)
• Dimensions: 5 × 4 × 2 in
• Tube Diameter: 34mm
• Mount Height: Medium (30mm)

NOTE: TO KEEP THE SIZE AND WEIGHT OF THESE RINGS TO A MINIMUM, THERE ARE NO ACCESSORY ATTACHMENT POINTS ON THESE RINGS. IF YOU WANT TO BE ABLE TO ADD ACCESSORIES TO YOUR RINGS, PLEASE CHECK OUT AREA 419 MATCH OR TACTICAL OFFERINGS.