Spuhr QDP-4016: 34mm Cantilever Scope Mount 0 MIL/0 MOA

(3 reviews)
Current Stock:
Ring Size:  34mm
Tilt: 0 MIL/0 MOA
Height:  38mm (1.50in)
Length:  151mm (5.94in)

Quick detachable mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.  



Prevents damage on scope due to flexing during heavy recoil or rough environment. The sniper’s rifle and the spotter’s carbine can have the same mount, enabling the use of same equipment and accessories. Rings are grooved inside to get a better grip of the scope and enabling gluing of the scope. The mount is milled out of one billet of material instead of being screwed together from small parts.


Scope Rotation

Patent pending solution for indexing the rotation of the scope, using an included tool/gauge to index the scope correctly to the mount and gun. Important since an incorrectly indexed scope unintentionally will also have a sideways adjusted point of impact and since it will be adjusted sideways when it is adjusted for elevation.


Mounting Placements

Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don′t want your barrel to touch the forend, you don′t want the sights to be mounted on the forend. Our mounting system has a minimum of seven interfaces for accessories and the laser can easily be mounted on the mount, giving the advantage of an undisturbed laser and a weight more central on the gun instead of forward.


Accessible and Readable Dials

The rings are cut 45 degrees instead of the usual horizontal, providing several advantages. The screws holding the parts together are not in the way of the knobs, thus the shooter can quickly determine the settings of the knobs. It also gives the shooter a horizontal line that helps the shooter not to rotate his gun unintentionally. The rings have index marks on the top and right side, making low knobs more easily readable.



Possibility of using various accessories such as angle cosine indicator, back up sights, lasers, illuminators, Night vision mounts etc. With traditional mounts this can be achieved only if there is sufficient space on the middle tube for additional rings, which there rarely is. Ideal Scope Mount Systems have interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces for certain accessories such as angle cosine indicators and red dot sights. A selection of interfaces for popular accessories are available, and others can be made to specification.



  • 5

    Posted by Pat Shannon on Jan 10th 2021

    Nothing better for my gun application. This Spuhr mount holds zero and is well built. No regrets...

  • 5

    Posted by Yared Hailemichael on Nov 23rd 2020

    This is my new staple mount for my Nightforce scopes. Fit, and finish are immaculate and the install was easy. The leveling wedge is brilliant and allows you to avoid goofy leveling methodologies.

  • 5
    Best QD on the market

    Posted by Anonymous on Mar 19th 2018

    Spuhr is known for rock solid mounts and this QD delivers! For cleaning the action, my stock requires removal of two bolts that sit under forward scope mounts. FINALLY I don't have to rezero after cleaning. Remove the scope, clean and the QD snaps back into exact alignment. Every cold bore shot is exactly where it's supposed to be. I'm a very happy camper!